ON ZETA, THEY DO IT RIGHT.

[Rhaven Blaack]

Moving on t the next figure, Buck Roger (in the prisoner uniform).

Here are the parts for the figure.


Starting with the legs.


The leg and boot are assembled.


The leg is put inside the boot.
(*NOTE* At this point, this is the first time that the builder can "play" with the height of the figure, by how far the leg is put into the boot.).


The leg is fully assembled.


Both legs are assembled.


Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.

 

[Rhaven Blaack]

Great Job! I'm greedy for Greebling now!

Thank you sir!

 

[Rhaven Blaack]

Next up is the "body".

Here is the pelvic component.


Here is the torso component.


Both components are assembled.


The "body" is fully assembled.


The legs ae attached to the body.
(*NOTE* This is the second point where builder can adjust the height of the figure, by how far in, the legs are placed.)


Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.

 

[Rhaven Blaack]

The components for the arm is assembled.


Both arms are fully assembled.


Both arms are attached.


Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.

 

[Rhaven Blaack]

Here are the parts for the head and neck.


The head and neck are fully assembled.


The head is attached.
(The figure is complete.)


Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.

 

[Rhaven Blaack]

Both figures are glued in place.


Here is a short video showing the turning mechanism (I would have shut the door first, but it is difficult to close it with only one hand).
View attachment 20250809_194215.mp4

Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.

 

[Rhaven Blaack]

@Revell-Fan have finished the upgrades for the Blue Hover Vehicle (in 1:32 scale). Fortuantely, there is not difference from the last Blue Hover vehicle that I built (with the exception of the scale).

Here are the parts for the "body".


Starting the assembly of the body.


I attached the light assembly.







Here are the parts for the top body part and storage compartment and the "trunk".


The top body part and storage compartment and the "trunk" are attached to the rest o the body


These are the parts for the front louvred grill.


The front louvred grill is assembled.


The front louvred grill ia attached in place.


Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.

 

[Rhaven Blaack]

Here are the internal formers. The are laminated to 1mm thick cardboard.


The formers are assembled.


The formers are put in place.




Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.

 

[mijob]

Great progres its hard to say what you are building looks like a pizza slider like chuffy suggested.

 

[Revell-Fan]

You can make your pizza disappear in that device, too. Experienced builders may even be able to make a pizza disappear without the device, too.

 

[Rhaven Blaack]

Here are the parts for the operator's cabin and control console.


Here are the interior side panels.


I inserted the interior side panels.




The operator's cabin frame, control console is assembled.


The operator's cabin frame, control console is attached in place.


Here is the steering wheel assembly.


The Operator's cabin interior is assembled.


The steering wheel assembly is attached to the Operator's cabin interior.




The Operator's cabin interior is put in place.






The bottom plate is attached in place.


Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.

 

[Rhaven Blaack]

Here are the parts for the (solid) "skirt".
(*NOTE* The reason why I am going with this type of "skirt" is that I will be (securly) gluing the vehicle to the base of the diorama.)


I assembled the internal formers.


All of the components are assembled.


I put the formers in place.


The "skirt" is fully assembled. I also painted a (5mm) boarder around the edge (in order to "hide" any (potential) gaps that may appear, when I attach it tot he body.)




The "skirt" is attached to the body.




Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.

 

[Chuffy70]

A fine amount of building, construction and disappearing prisoners!

I fancy a pizza now!

 

[Rhaven Blaack]

I fancy a pizza now!

 

[mijob]

Lovely work all looks 3c.

 

[Rhaven Blaack]

Thank you sir!

 

[Rhaven Blaack]

Here are the parts for the "energy packs" and the intake system.


The "energy packs" are assembled.


The "energy packs" are attached in place.




Here are the internal formers for the intakes.
(*NOTE* As you can see, the formers have a double spine. THis is needed to add strength, rigidity, and support to the component as a whole).


Here are all of the components for th eintake.


The formers are put in place.


The bottom plate is attached in place and the intake is fully assembled.


The intakes are attached.




This is a "step" that will be attached to the back end of the intake system.


The step is attached in place.




I finished the other side.


Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.

 

[Rhaven Blaack]

These are the parts for the propulsion exhausts.


The propulsion exhausts are assembled.




The propulsion exhausts are attached in place.



Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.

 

[Rhaven Blaack]

Here are the parts for the spoiler/trunk lid.


The spoiler/trunk lid is assembled.


I attached the spoiler/trunk lid in place (showing the trunk open).


Now showing the trunk closed.


Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.

 

[Rhaven Blaack]

Here are the parts for the cushion for the "cargo" area.


The cushion is assembled.


The cushion is attached in place.


Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.