ON ZETA, THEY DO IT RIGHT.

[Rhaven Blaack]

Moving on to the conduits. Here are the parts for the conduits.


The separate parts for the conduits are assembled.


Attaching the conduits is pretty straight forward. I started with the mounts that attach to the lift tube.


I attached the mounts to the "trapezoid" piece.


I attached the connetorpieces that connet the lift tube to the "trapezoid" piece.




I attached the "trapezoid" pieces to the base and lift tube.




I attached the long condiuts to the "trapezoid" pieces and the lift tube.




Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.

 

[Revell-Fan]

Damn, the silver pieces look like silver in your pictures. Great job!!!

 

[Rhaven Blaack]

Thank you sir!!!

 

[Rhaven Blaack]

Next up is the ladder for the ZETA PRISON LIFT.
Here are the parts for the ladder. The parts are laminated to (a total of) 1.5mm thick.


The ladder is assembled.






The ladder is attached in place.






Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.

 

[Chuffy70]

More fine work...

 

[Rhaven Blaack]

Thank you sir!

 

[Revell-Fan]

More fine work...

I almost read, "More fire works", and thought: How could you know the explosive nature of this thread..!

 

[Rhaven Blaack]

I am currently working on designing figures for this diorama (vignette). Yes, they are paper and are based on original template that @Tirick created. Once I have them finalized, I will post photos of their build.

 

[Rhaven Blaack]

As mentioned earlier, I have designed templates figures for the diorama (mainly the shuttle pilot and Buck Rogers 'in prison garb").
(*NOTE* Yes, I did design templates for the prison guard (HUGO) and the female prisoners as well. However, those builds will be featured in this thread later).

I started with the Shuttle Pilot. Here are the parts.


I started with the leg parts. I assembled each component.


Attaching the leg components together. (*NOTE* At this point, if you wish, you can put a bend in the knee or position the foot, however you with).


The leg is fully assembled.


Here is the second leg (with a bent knee).


The second leg is fully assembled.


Here is the part for the pelvic component.


Starting to shape and form the pelvic component.


The pelvic component is fully assembled.


The torso component is assembled.


The pelvice and torso components are attached together.
When doing so, the torso slides into the pelvic component. You can adjust the height if the torso as a whole, by how far the torso is put into the pilvic component.


Here the legs and torso.


The legs are attached to the pelvic component.


Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.

 

[Chuffy70]

Every time I see a flat paper face before they are cut out, I can't help thinking of the miner in Outland decompressing...

Nice start, some fine legwork

 

[Rhaven Blaack]

Continuing on with the "vest" and arms.

Here is the part for the "vest".


The "vest" is assembled.


The "vest" is attached to the body.


Here are the parts for the arms.


The components for the arm is assembled.


Assembling the arm.


Both arms are fully assembled.
(*NOTE* Do not attach the arms until after attaching the belt, holster, and blaster. Otherwse, the arms can get in the way.)


Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.

 

[Rhaven Blaack]

Here are the parts for the blaster, holster and belt.


I assembled the holster


I attached the belt and holster to the waist.


I assembled the blaster




I put the blaster in the holster.


I attached to arms.


Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.

 

[mijob]

I always like to see you building these figures.

 

[Rhaven Blaack]

I always like to see you building these figures.

Thank you. They are fun to build.
By the way, there are "Stormtrooper" figures available as well.

 

[Rhaven Blaack]

Moving on to the head and collar.

Here are the parts for the head and collar.


The head and collar are assembled. I attached the collar to the shoulders.


I attached the head in place.


After conferring with @Revell-Fan, it was decided to cut down the width of the collar and reshpe it to form more to the body.

Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.

 

[Rhaven Blaack]

I mounted (but did not glue) the figure to the stares.










Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.

 

[Revell-Fan]

Great job, bro!

 

[Chuffy70]

Good pose, nicely detailed

 

[Rhaven Blaack]

Thank you both.

 

[spaceagent-9]

Great Job! I'm greedy for Greebling now!