ON ZETA, THEY DO IT RIGHT.

Moving on t the next figure, Buck Roger (in the prisoner uniform).

Here are the parts for the figure.
20250808_074213.jpg

Starting with the legs.
20250808_084022.jpg

The leg and boot are assembled.
20250808_084549.jpg

The leg is put inside the boot.
(*NOTE* At this point, this is the first time that the builder can "play" with the height of the figure, by how far the leg is put into the boot.).
20250808_090033.jpg

The leg is fully assembled.
20250809_073152.jpg

Both legs are assembled.
20250809_073528.jpg

Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.
 
  • Like
  • Love
Reactions: Chuffy70, Toutenkarton, Revell-Fan and 1 other person
Next up is the "body".

Here is the pelvic component.
20250809_075650.jpg

Here is the torso component.
20250809_091002.jpg

Both components are assembled.
20250809_093330.jpg

The "body" is fully assembled.
20250809_094805.jpg

The legs ae attached to the body.
(*NOTE* This is the second point where builder can adjust the height of the figure, by how far in, the legs are placed.)
20250809_104541.jpg

Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.
 
  • Like
  • Love
Reactions: Chuffy70, Toutenkarton, Revell-Fan and 1 other person
Both figures are glued in place.
20250809_153759.jpg

Here is a short video showing the turning mechanism (I would have shut the door first, but it is difficult to close it with only one hand).
View attachment 20250809_194215.mp4

Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.
 
  • Like
  • Love
Reactions: Chuffy70, Toutenkarton, Revell-Fan and 2 others
@Revell-Fan have finished the upgrades for the Blue Hover Vehicle (in 1:32 scale). Fortuantely, there is not difference from the last Blue Hover vehicle that I built (with the exception of the scale).

Here are the parts for the "body".
20250817_141648.jpg

Starting the assembly of the body.
20250817_180018.jpg

I attached the light assembly.
20250817_180506.jpg


20250817_181608.jpg

20250817_181645.jpg

Here are the parts for the top body part and storage compartment and the "trunk".
20250817_182229.jpg

The top body part and storage compartment and the "trunk" are attached to the rest o the body
20250818_135129.jpg

These are the parts for the front louvred grill.
20250818_150244.jpg

The front louvred grill is assembled.
20250818_154355.jpg

The front louvred grill ia attached in place.
20250818_154729.jpg

Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.
 
  • Like
  • Love
Reactions: Toutenkarton, Chuffy70, Revell-Fan and 1 other person
Here are the parts for the operator's cabin and control console.
20250819_084553.jpg

Here are the interior side panels.
20250819_105550.jpg

I inserted the interior side panels.
20250819_110326.jpg

20250819_110353.jpg

The operator's cabin frame, control console is assembled.
20250820_163622.jpg

The operator's cabin frame, control console is attached in place.
20250820_173523.jpg

Here is the steering wheel assembly.
20250820_173553.jpg

The Operator's cabin interior is assembled.
20250820_205123.jpg

The steering wheel assembly is attached to the Operator's cabin interior.
20250820_205301.jpg

20250820_205326.jpg

The Operator's cabin interior is put in place.
20250820_205555.jpg

20250820_205815.jpg

20250820_205905.jpg

The bottom plate is attached in place.
20250820_212924.jpg

Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.
 
  • Like
  • Love
Reactions: Chuffy70, Toutenkarton, micahrogers and 1 other person
Here are the parts for the (solid) "skirt".
(*NOTE* The reason why I am going with this type of "skirt" is that I will be (securly) gluing the vehicle to the base of the diorama.)
20250821_110145.jpg

I assembled the internal formers.
20250821_144234.jpg

All of the components are assembled.
20250821_145943.jpg

I put the formers in place.
20250821_150135.jpg

The "skirt" is fully assembled. I also painted a (5mm) boarder around the edge (in order to "hide" any (potential) gaps that may appear, when I attach it tot he body.)
20250821_151133.jpg

20250821_151159.jpg

The "skirt" is attached to the body.
20250821_152144.jpg

20250821_152213.jpg

Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.
 
  • Like
  • Love
Reactions: Toutenkarton, micahrogers, Revell-Fan and 1 other person
Here are the parts for the "energy packs" and the intake system.
20250821_161329.jpg

The "energy packs" are assembled.
20250822_200235.jpg

The "energy packs" are attached in place.
20250823_075133.jpg

20250823_080125.jpg

Here are the internal formers for the intakes.
(*NOTE* As you can see, the formers have a double spine. THis is needed to add strength, rigidity, and support to the component as a whole).
20250823_102218.jpg

Here are all of the components for th eintake.
20250823_102755.jpg

The formers are put in place.
20250823_102914.jpg

The bottom plate is attached in place and the intake is fully assembled.
20250823_105455.jpg

The intakes are attached.
20250823_110535.jpg

20250823_125054.jpg

This is a "step" that will be attached to the back end of the intake system.
20250823_142637.jpg

The step is attached in place.
20250823_143158.jpg

20250823_150618.jpg

I finished the other side.
20250823_151251.jpg

Please stay tuned in to your local Earth Directorate broadcasting channels for further updates.
 
  • Like
  • Love
Reactions: Toutenkarton, Chuffy70, micahrogers and 2 others
You must log in or register to reply here.
Top Bottom