"V" - Visitor blaster (2.0)

These are the parts for the "spine" of the front body section.
20260307_195742.jpg

The "spine" parts of the front body section are assembled.
20260307_203751.jpg

The "spine" of the front body section is attached in place.
20260307_204847.jpg

20260307_204911.jpg

20260307_204941.jpg

Here are the parts for the barrel.
20260308_100442.jpg

The barrel is assembled.
20260308_103357.jpg

The barrel is attached in place.
20260308_103834.jpg

The is the front site.
20260308_105442.jpg

The front site is assembled.
20260308_110318.jpg

The front site is attached in place.
20260308_111326.jpg

This is the greebling for the barrel.
20260308_145642.jpg

The greebling is attached in place.
20260308_153734.jpg

20260308_153804.jpg

So please stay tuned to the "FREEDOM NETWORK BROADCASTING SYSTEM" for the latest updates on this project!
 
  • Like
Reactions: Revell-Fan
@Revell-Fan and I had a long talk about some of the greebling. We had to go back and check out various reference material pertaining to this prop, and found out that there was a "rifle" selector switch on it.
@Revell-Fan was able to make working parts
20260309_112428.jpg

I started assembling the selector switch.
20260309_114507.jpg

20260309_130039.jpg

20260309_130053.jpg

20260309_130633.jpg

20260309_130935.jpg

I attached the selector switch to the receiver.
20260309_131554.jpg

20260309_131559.jpg

This video shows that the selector switch is functional.
View attachment 20260309_131607b.mp4

These are the selector switch stoppers.
20260309_133419.jpg

The selector switch stoppers are put in place.
20260309_134318.jpg

So please stay tuned to the "FREEDOM NETWORK BROADCASTING SYSTEM" for the latest updates on this project!
 
  • Like
Reactions: Revell-Fan
You must log in or register to reply here.
Top Bottom