To be somewhat Enterprising....
- Thread starter Cybergrinder
- Start date
Moving onto the warp nacelles, here's the upper section
Looking at the curves involved I've decided to reinforce the inner as below
A quick check on a stand shows it's nose heavy, means I'm going to have to weight the nacelles before assembly
Looking at the curves involved I've decided to reinforce the inner as below
A quick check on a stand shows it's nose heavy, means I'm going to have to weight the nacelles before assembly
And the top and bottom joined
And a completed warp nacelle
And a completed warp nacelle
And attached!
Now for the other one...
Now for the other one...
Cruse at warp 7, warp 9.6 till fuel exhaustion, Warp 9.8 till nacelles overheat, warp 9.9 till core shutdown. all as tested at Utopia Planatia fleet yards, Mars orbit.
Engage spore drive - jump - enter Battlestar Galactica universe. Mission accomplished.
(duck and cover)
(duck and cover)
I can't tell you how many times I've dreamed of a BG ST crossover... But my choice to fight the Cylons would be the E-EEngage spore drive - jump - enter Battlestar Galactica universe. Mission accomplished.
(duck and cover)
- Apr 5, 2013
- 14,543
- 11,247
okay folks, let me tell you something about these bulids!
Until now all these Enterprises were from one designer! just the last Enterprise D was a reworked version from me. Of course i had also my hands on the other ships, but Cybergrinder choose the original version or didnt downloaded the reworked versions. If i remember right just the ENT-C was not uploaded from Clever Santoro. The models are all from a Star Trek game and converted to a Papermodel without any corrections. My versions are better unfolded AND i did a testbuild. But i couldnt added an internal frame, because i had only the PDO file. (at this time it was not possible to extract the 3d-model from a pdo file)
Maybe this all are reasons that these Enterprise builds are abit frustated!? But we will see also a build of a ship (ENT-E), what was designed from the begin as a Papermodel and not for a videogame! I wish you good luck!
Greetings
Marko Härtel aka D-Whale
BTW: The ENT-D can only docked on the correct station
Here my Enterprises in the same scale (The ENT-C wasnt build at this time and the TOS-ENT was destroyed)
Until now all these Enterprises were from one designer! just the last Enterprise D was a reworked version from me. Of course i had also my hands on the other ships, but Cybergrinder choose the original version or didnt downloaded the reworked versions. If i remember right just the ENT-C was not uploaded from Clever Santoro. The models are all from a Star Trek game and converted to a Papermodel without any corrections. My versions are better unfolded AND i did a testbuild. But i couldnt added an internal frame, because i had only the PDO file. (at this time it was not possible to extract the 3d-model from a pdo file)
Maybe this all are reasons that these Enterprise builds are abit frustated!? But we will see also a build of a ship (ENT-E), what was designed from the begin as a Papermodel and not for a videogame! I wish you good luck!
Greetings
Marko Härtel aka D-Whale
BTW: The ENT-D can only docked on the correct station
Here my Enterprises in the same scale (The ENT-C wasnt build at this time and the TOS-ENT was destroyed)
I think the Cylons would prove more of a formidable threat than the Borg posed. The Borg were wanting to assimilate the Federation, the Cylons would want to eradicate it.
@D-WHALE , I was looking for a consistency across the models, I have your version but it didn't quite "fit in" with the look I'm after. I did give serious thought to building yours though. My other issue is space. I don't have a lot and the models you see (Ent -E excluded) I have reduced the template to 50% of the original, yours is a bit bigger
THE DC
Highly Esteemed Member
BTW: The ENT-D can only docked on the correct station
View attachment 199444
Here my Enterprises in the same scale (The ENT-C wasnt build at this time and the TOS-ENT was destroyed)
Marko,
Did you ever make the McKinley Station in your pics available?
That is really great dude!okay folks, let me tell you something about these bulids!
Until now all these Enterprises were from one designer! just the last Enterprise D was a reworked version from me. Of course i had also my hands on the other ships, but Cybergrinder choose the original version or didnt downloaded the reworked versions. If i remember right just the ENT-C was not uploaded from Clever Santoro. The models are all from a Star Trek game and converted to a Papermodel without any corrections. My versions are better unfolded AND i did a testbuild. But i couldnt added an internal frame, because i had only the PDO file. (at this time it was not possible to extract the 3d-model from a pdo file)
Maybe this all are reasons that these Enterprise builds are abit frustated!? But we will see also a build of a ship (ENT-E), what was designed from the begin as a Papermodel and not for a videogame! I wish you good luck!
Greetings
Marko Härtel aka D-Whale
BTW: The ENT-D can only docked on the correct station
View attachment 199444
View attachment 199445
Here my Enterprises in the same scale (The ENT-C wasnt build at this time and the TOS-ENT was destroyed)
View attachment 199446