Military base of AČR (1:250)
- Thread starter mikezax
- Start date
Thanx 
...It's simple - cut a circle out of transparent foil that has the diameter of the rotating propeller and then scratch it in a circular pattern with sandpaper...
...It's simple - cut a circle out of transparent foil that has the diameter of the rotating propeller and then scratch it in a circular pattern with sandpaper...
- Apr 5, 2013
- 14,513
- 11,195
I love the effect that you used on the helicopter. I use that on static display of airplanes mounted on a stand. What I do for each blade lines in it to demonstrate movement cutting a wide piece for propeller, 2, 3, 4, and 5 prop propeller, What Mike did for the helicopter is perfect What I am suggesting is for aircraft propellers.
Thanx
So that the helicopter is not on a distracting pole, I will do it like in the attached photo... the rescuers will practice rappelling from the helicopter to the base... I will be on the ground and a rope (plastic profile) will go from them on which the helicopter will be...
So that the helicopter is not on a distracting pole, I will do it like in the attached photo... the rescuers will practice rappelling from the helicopter to the base... I will be on the ground and a rope (plastic profile) will go from them on which the helicopter will be...
Thanx, I'm finishing the military base, I finally managed to get some thin wire for the helicopter rope... I'm still adjusting it a bit, but this is what it could look like when finished
The diorama looks AMAZING. To echo Zathros, the helicopter looks like it is hoisting something up.
At the end of the helicopter rope are 2 members of the rescue team in orange clothing (like in the real photo) if it is meant that he lowered (or is going to lift) these people
...and this is how the AI imagines my military base works...
...and this is how the AI imagines my military base works...
Last edited:
WOW! Another ZAX exclusive! Well done and it's not even finished yet!Thanx, I'm finishing the military base, I finally managed to get some thin wire for the helicopter rope... I'm still adjusting it a bit, but this is what it could look like when finished
View attachment 234550
So I'm done, a little summary of the whole build:
Military base of the Czech Army
Author: Rawen and Michal Tichý
Source: patreon
Scale: 1:250
Video:
11 years ago I started this microspoic model - the entire base (or part of it) is on A4. Since the model was still in good condition, it was time to finally finish it...
My modifications:
-buildings-small modifications, mainly the roof
-mesh fence
-I practically made the Tower from scratch. Since I don't like "air" in models, I had no choice but to put it in a pile of wire (more than 100 pieces). It's not ideal, but considering how small it is, it's still possible...
-I made the interior in the garage, although it probably won't be very visible...
Technology (about 20 pieces of military equipment in a pile - all have a finished model chassis and a few details)
-Landrover 90, 110, 110 MP, Tatra 815 6x6 ACHR 90 M
-armored transporter OT 62 TOPAS
-4 x Tatra 805. These are 2x Tatra 805 RDS 66 Duha, a flatbed truck with a tarpaulin and a flatbed truck without a tarpaulin (this is my modification)
-Tatra 813 KOLOS, which pulls a P50N low-bed truck, on which a BRDM armored vehicle is loaded 2
-3 x Tatra 815 8x8 - flatbed with tarpaulin, 6x6 - flatbed with tarpaulin and flatbed without tarpaulin (this is my modification) and then 3 x Praga V3S - flatbed with tarpaulin, flatbed without tarpaulin (this is my modification) and a box in UN modification
-flying helicopter PZL W3 Sokol. (I made my own chassis, instead of a static propeller added "spinning" propellers, I attached the helicopter to a thin wire at the end of which there are rescuers (orange figures) so it looks like they are having a training exercise and the helicopter is just lowering or lifting them)
-used more than 20 pieces of figures in a pile, I changed the grass from sawdust sprinkled to static grass, used model trees...
Military base of the Czech Army
Author: Rawen and Michal Tichý
Source: patreon
Scale: 1:250
Video:
11 years ago I started this microspoic model - the entire base (or part of it) is on A4. Since the model was still in good condition, it was time to finally finish it...
My modifications:
-buildings-small modifications, mainly the roof
-mesh fence
-I practically made the Tower from scratch. Since I don't like "air" in models, I had no choice but to put it in a pile of wire (more than 100 pieces). It's not ideal, but considering how small it is, it's still possible...
-I made the interior in the garage, although it probably won't be very visible...
Technology (about 20 pieces of military equipment in a pile - all have a finished model chassis and a few details)
-Landrover 90, 110, 110 MP, Tatra 815 6x6 ACHR 90 M
-armored transporter OT 62 TOPAS
-4 x Tatra 805. These are 2x Tatra 805 RDS 66 Duha, a flatbed truck with a tarpaulin and a flatbed truck without a tarpaulin (this is my modification)
-Tatra 813 KOLOS, which pulls a P50N low-bed truck, on which a BRDM armored vehicle is loaded 2
-3 x Tatra 815 8x8 - flatbed with tarpaulin, 6x6 - flatbed with tarpaulin and flatbed without tarpaulin (this is my modification) and then 3 x Praga V3S - flatbed with tarpaulin, flatbed without tarpaulin (this is my modification) and a box in UN modification
-flying helicopter PZL W3 Sokol. (I made my own chassis, instead of a static propeller added "spinning" propellers, I attached the helicopter to a thin wire at the end of which there are rescuers (orange figures) so it looks like they are having a training exercise and the helicopter is just lowering or lifting them)
-used more than 20 pieces of figures in a pile, I changed the grass from sawdust sprinkled to static grass, used model trees...
How did you make the soldier figurines? I like this scale (1:250). My Teladi Kea is of that scale and the pirate sailing ship I am designing now. I may need some seadogs for that ship when it is done