Come on back to the caboose and get a cup of coffee [or sweet ice tea] Part V

Status
Not open for further replies.
Morning. Slept later. :thumb: Got good rain last night so garden is going good. Got some wall repairs to do where I took down over the picture light fixtures. :cry: Big regional transportation meeting later this afternoon.
Jeffrey, thanks for the pictures. TomPM, you are busier than I am.
Have a good one.
 
Morning all - going to the symphony tonight with the bride after work - since it doesn't begin until 8 - that probably means I'll work late. Train went into emergency at 55 mph today on the way in. I hear the brakes go and then everything shudder to a long stop. Engineer talked to conductor on the intercom which we riders can hear too - a close call with someone running in front of the train. Sheesh. Mather stock cars sure are neat-looking. Prayers for those ailing.
 
steamhead said:
Don...Hope Chris gets better soon...How did his lung puncture in the first place..?

All have a good night.
Click to expand...

Steamhead - I have really learned a lot the past few days regarding collapsed lungs. In Chris' situation it was NOT the result of trauma, but a condition on the exterior wall of the lung. A small area had what was reffered to as a BLEB, which is kinda like a pimple or a cyst. According to Dr, been there since birth. Anyway this Bleb, errupts or opens creating a whole in the lung, again quite small, and the air evacuates and fills in the chest cavity. Chris had a 30% collapse of the lung. This condition is not uncommon among slender people, (I certainly wouldn't have to worry), but Chris is 6'2" and weighs 170. So I guess he is a prime candidate. Fortunatly he doesn't smoke or anything so that helps.

The condition usually will heal itself by the lung forming scar tissue over the area, which is what we are waiting to see if that happens. He still has this tube in which is connected to a check valve to insure all the air is evacuated. Tomorrow he goes for an x-ray to determine if they will do surgery for repair, or if it taking care of itself.

As far as reocurrance, their is a 30% probability it could happen again in 1 to 2 years. So for now we are waiting for Thursdays results.
 
Greetings all.

I say "greetings" rather than "good morning/evening" as I never know what time of day it is here, never mind there.:mrgreen:

there was a strange orange ball in the sky this morning. We will never know what the ball is because it will be behind rain clouds by the afternoon
Click to expand...
Tom: we get that a lot over here.
If you can see Big Ben, it's going to rain
If you can't see Big Ben, it's raining.
:wave:
 
:wave::wave::wave:

Jeffery and jefelectric will post some pics tonight of some of my paper models(buildings from model builder) sorry It has taken this long to get around to it:mrgreen:


Chief did you pay to have the pond stocked??? Here in Ohio the last that I heard is if you pay to have a pond or lake stocked you can keep others out but if have the state stock it for free anyone can come along and drop a line and catch your fish:eek::confused::rolleyes::confused:

I think I will get my fishing licesen this year have not been in a long time
 
Fishing!
Got license - check!
Got 3 poles - check!
Got kids - check!

I'm ready to go, but wife and kids are going out of town this weekend. Maybe in 2 weeks?

Jeff, thanks for pics. Park looks like it will be nice, are you making a baseball diamond? Laz made one a year ago I think that looked really nice!

Have fun at the symphony, Doug - I like all kinds of music except for (C)rap.
 
here are some examples of what you can do with the software, these are not completed yet as I need to build a core to keep the structures square.
 

Attachments

  • MVC-001S.JPG
    MVC-001S.JPG
    38.7 KB · Views: 4
  • MVC-003S.JPG
    MVC-003S.JPG
    37.7 KB · Views: 3
  • MVC-004S.JPG
    MVC-004S.JPG
    39.6 KB · Views: 3
  • MVC-005S.JPG
    MVC-005S.JPG
    37.7 KB · Views: 3
  • MVC-006S.JPG
    MVC-006S.JPG
    38.1 KB · Views: 3
EVENING ALL
CSX=question: would it be easier to mount the paper walls before assembly? I really like the way the detail comes to life.
We had another gloomy day, I don't think it made 60. weekend is suppose to be nice,we shall see. I feel a little better today but not good yet. No trains today still goofing off. Get ready for thursday cause here it comes,,S.J.
 
Jeffery like the the last two pics of steamers:thumb:


Sir James it would be better to mount them before assembly, the makers of the software suggest using a material called gator board, I would think if you have a printer that would take card stock that would be another way of doing it:cool:
 
Good evening,

CSXect, Have you tried foam board for building the core? I have used it for a few things and it is very easy to work with. What type of paper are you printing on? The buildings look very nice.

Don, Hope Chris continues to improve.

Busy schedule for the next couple of days. Taking wife's car to be serviced first thing tomorrow then driving 1 1/2 hours to pick up 5 year old granddaughter for the weekend. Friday we are going to the PA RR Museum, she requested this as she loves to build train cars with the Lego bocks there. Will also make stops at the Cho-Cho Barn and the Toy Train Museum. Of course Nana and her will also get in a lot of shopping over the weekend. We will also run trains here at home. She also loves DCS. :thumb:
 
jefelectric said:
Good evening,

CSXect, Have you tried foam board for building the core? I have used it for a few things and it is very easy to work with. What type of paper are you printing on? The buildings look very nice.
Click to expand...

I have not had much time to build a core for the buildings yet but gator board/foam board sounds like a simple easy way to do it. By the way the Ymca sign and the Masonic stainglass window were imported images that I googled. The software is very versatile and gets updated fairly often.:thumb::cool:
 
Jefelectric I use general purpose printer/copier paper and HP all in one ink jet when I get a design done I will have to spray it with an artist spray to lock the colors in so they do not fade like the shed./garage did.
 
Private property and private pond. Over 50 years old. I have paid for grass carp and channel cats. "Bream", crappie and bass are BIG and been there since it was built. Signs posted on all paths, No Trespassing, Hunting or Fishing. No Fishing signs all around the pond. All paths are cabled off with locks. Now why would you go through all of that and act dumb if caught. BTW: all Rolesville PD Officers, Wildlife Enforecement Officer living in Rolesville and most Deputies have keys. Also small private shooting range behind the dam used by all key holders.

Just back from Greenville NC and Pitt Memorial Hospital [East Carolina Univ. Med School]. Dr. sent Mom. She is back home. Must now find daycare for her or move her to assisted living facility. She is fighting both. Tired. Later
 
Chief Eagles said:
Private property and private pond. Over 50 years old. I have paid for grass carp and channel cats. "Bream", crappie and bass are BIG and been there since it was built. Signs posted on all paths, No Trespassing, Hunting or Fishing. No Fishing signs all around the pond. All paths are cabled off with locks. Now why would you go through all of that and act dumb if caught. BTW: all Rolesville PD Officers, Wildlife Enforecement Officer living in Rolesville and most Deputies have keys. Also small private shooting range behind the dam used by all key holders.
Click to expand...

I can not belive I am typing this but someone in Michigan had a good idea they had a resurant and a large pond and the deal was you bought food/bait for the trout and they would cook up the fish you caught......but here is the good part they had made a small artfical stream and pumped water out of pond into the stream that was lined with small rocks and then back to the pond and this got the water moving and increased oxygen exchage :cool: As they(trout) do better in water that is moving and cool oxygen rich water

I had no intention of raiding your pond by the way:mrgreen:

Someday when I can afford it I would like to get a place in the country with room for a big pond and a big outbuilding for the trains:twisted:

well it is getting late and my spelling is getting worse, good night all.:wave:
 
Morning!

Great engine Jeffrey! Looks like a pile-up in the back as you were taking the engine pics...Better investigate. The park is comming along nicely! Maybe an imprompt-to game of baseball squeezed in while they are waiting for the grill to heat up? Maybe some frisbee?

Chief: Relocate the shooting range closer to the pond.

More wiring today.

Kurt
 
Status
Not open for further replies.
Top Bottom