Search results

Made an antenna Decided to go with moveable, so i rolled some 80 grams paper on an axle, so it will insert tight into antenna base. This will hold axle from the other side when it rotates Glued to its place. Was some issue with antenna base. The slop wasn't calculated right and I was in...

Thanks friends Continue with little details on a hull. Axe Shovel Extinguisher Crank lift Crowbar Attached to designated marks Errors: Minor - part 332 not pointed correctly on drawings, part 350doesnt have color inside

Added a lot of small details: Towing and lifting hooks Main light Some kind of breathing tube Horn Front fender hinges and auxiliary lights All on it's place Errors: None

So, it was a busy week, that shows little progress. In this stage i decided to finish all the outer rivets. As I mentioned before, got laser cut round rivets 0.6 mm and 0.8 mm from Drafmodel. Cutting is high quality, but as it happens in such small scale, sometimes they fall into layers, so i...

As i mentioned you early - this machine gun adds a lot to this model and you assembled it excellent! :cool:

Worked hard on all hatch doors and visor covers Visor covers and front transmission cover Side hatch doors and hinges Rear engine hatch doors and hinges Fuel tank filler nozzle covers All doors on their places and can be opened As i suspected, there is no way to open visors...

Next step is the fenders. In this publishing there is a double-sided printing and this a huge plus in in design. I wish every publisher could do so. For this time i marked bending lines from outside. This gave me accurate 90 degrees bend. Before gluing to place, I assembled front and rear...

Finished body with rear upper part. First of all assembled power structure, so i can point where will be endings of exhaust pipes. Then inner exhaust pipes were bent from wire with isolation and glued inside. Attached power structure and covered with skin. Errors: There is a...

Thanks guys! Started to put outer skin. This step is crucial, and you must cut everything prices and dry fit every part. I did minimum adjustments to two parts only: 243 and 244. The fitment was satisfying and everything aligned well. To connect all parts in a best way i did it in this...

Thanks friends My patience for repeated small parts is not what it used to be. So, in couple with holidays and pressure at work it took some time until i finished those machine gun magazines. Did it bit by bit here and there. In addition made shelfs for those, rotation gear strip and two gas...

Continue with visors mechanisms Three of a kind The front visor was a tricky one, but i doubt that i will play with those, though they are working and can be open Errors: Part 210 must be glued on 0.5 cardboard, but asterisk is missing. Assembled part 226 does not fit correctly...

Little progress with upper hull part I glued inner skins by perimeter and attached the part to main hull Connected with no issues Errros: None

It's time for hull's upper part Starting from a frame This one has a lot of angled sides, so designer gave support structure to glue all sides with right angles On the left is the support structure, on the right is the hull part Most of the parts must be cut with angled edges In a...

Wau! First as i saw the model in 1:35 with full interior i though you are crazy to build it. I can't understand why to design it in this scale with full interior. Then I read that you upscaled it to 1:18. Relieve ;) But the question is why not 1:25, though it is the ideal scale for paper armor...

Front plate with all the stuff: instrument panel, radio set and couple of shelfs For gauges glass imitation i used some thin plastic from old package Assembled all together Glued in place Errors: Gluing mark on detail 191 for detail 195 (radio set rack) must be full white...

Thanks Built driver's seat. The frame made from two sizes of solder wire Glued parts 188a and 189a on 1.5mm cardboard and not 0.5mm, as suggested This gave me more easy way to glue the skin on And seat installed at it's place Errors: None

Thanks guys! Next are steering brake levers The rod itself I made from office fastener Bugs: detail 183 must be marked as count 2 and not one

Thanks to all! Next are floor plates and accumulator I chose to separate plate,s so those can be lifted to get access to crate below, and put them freely. Accumulator Then i assembled pedals Pedals must be glued to pedal levers only after foot plate put in place. Bugs...

Well... Hello to all! I'm back... after three months Sorry for that :rolleyes: All this time was consumed by moving with my family to our own apartment. It was a tough period and i didn't find time, space and mood to continue the model. But now i have my own cabinet and more convenient place for...

Next sub build is a gearbox Gear stick knob was made from little piece of playdough :) Errors: None