Search results

Then I have prepared the Hull side (have stuck on stuck together and cut edges dyed) and from rear in the direction of bow. At the moment only the Starboard side without side armour plating. Him I must still strengthen, in addition, with cardboard and then stick on the Hull side

Hello friends, It goes on. On all across frames I have stuck, in addition, white 6 mm wide paper stripes. That prevents origin of possible "ribs" and in the bow area the adhesive surface increases for Hull side

Hi, friends Here fast a working photo. After stick of the main deck I have loaded whole still for a few hours with books and leave dry. Greeting Christoph

Hello friends, @Renaud, The Tape is from plastic and does not change his form. I have already built dutzend to models thus and it passes nothing. @Glen, After building ones the whole model it is sprayed with protection varnish UV and the viscous one put are no more viscous. I have no...

I turn so prepared shelf-wall and with transparent „Tesa-Band “sticks I behind the Buleye one piece of band. So stuck band imitates the glass-disks of Buleye Now, the main-deck is glued on the frame scaffolding and the shelf-walls however over it late Greeting Christoph

So, the Buleye see with pasted in wire-fights

From so cut feather, small wire-rings originate, that with glue (Wiccoll), I paste in the punched puncture

Then, I cut these feathers with sharp knife or scalpel

Then on 1, 5 mm drills rolls up I a 0, 2mm wire. So, feather originates a wire

Hello friends, As I have already written, I will now do the Buleye First punch I with help of 1, 5 mm punches all drawn Buleye in the shelf-wall.

Now I have cut out all board walls, but this is already the next subject Greeting Christoph

Then the first deck adaptation test. Fits perfectly!

To save place some parts on the unused surfaces are drawn by main deck. All parts must be cut out

Then I have dyed all cut edges of earlier already low-cut parts of the main deck with watercolour pencil.

Then I have cut out of the construction Card all parts for the stand and have stuck on 3 mm cardboard. Then all parts low-cut and the cut edges with watercolour dyed and assembled. In addition, the ship coat of arms has found in the Internet and has printed out on photo paper and has stuck on...

Hello friends, The trunk is already a dry! Now I have all before prepared drive shaft together with in addition to belonging props on suitable ones put stuck on. After a few hours of drying time Has to me the whole underwater ship skin with „terracotta effect Varnish „paints. This was...

Hello Jim, You have missed no construction phase. I have used no filling. After paste from all parts I have smoothed only with the sandpaper the whole one and have painted with color. The color I uses is not on aquatic base (acrylic color) but Color in chemical composition resin owns...

After 48 hours the whole underwater ship skin is painted with Terracotta color. With the best greetings Christoph

After the third layer one sees no seam

For the last special color layer I with Terracotta effect varnish do all previous color layers must be really quite dry. Best of all the whole trunk for 48 hours is dry leave. This avoids origin from tore on the surface the Quick-drying color layer could come into being. I have already...